Hebei reticular fibers professional manufacturer Which - ebd031185674948 13091006138 
 Reticular fiber is non-toxic, odorless, low density, strength, stiffness, hardness and heat resistance are better than the low-pressure polyethylene, can be used at about 100 degrees. Reticular fibers have good electrical properties and high-frequency insulation from humidity , but the low temperature brittle not wear, easy to aging. suitable for the production of general machinery parts, corrosion-resistant parts and insulating parts. Reticular fibers common organic solvents, acids, alkalis it almost does not work, can be used for utensils. 
 ① slurry. Reticular fibers in the thinner (such as hexane) polymerization, was the first industrialized, and so far the largest production methods. ② liquid bulk. Reticular fibers in 70 ℃ and 3MPa, under the conditions of polymerization in liquid propylene. ③ Gas Act. Polymerization in the reticular fibers gaseous conditions. The latter two methods do not use thinner, short process, low energy consumption. Liquid bulk is now showing the advantages come from behind. 
 Reticular fibers forming characteristics 
 A reticular fiber crystalline material, moist, easy to melt fracture, long-term metal exposure and thermal decomposition. Reticular fibers liquidity is good, but the contraction of the scope and shrinkage, prone to shrinkage. Dents, deformation. Reticular fibers fast cooling, pouring and cooling system should be slow to heat, and pay attention to controlling the molding temperature, melt temperature low-temperature high-pressure, easy orientation, the mold temperature is below 50 degrees, plastic is not smooth, easy to produce bad weld. flow marks, 90 degrees or more prone to warpage. Reticular fiber plastic wall thickness shall be uniform to avoid lack of glue, sharp corners to prevent stress concentration. 
 Tel: 031 185 674 948 
 Contact: Manager Ma